innovative technology for a connected world multi-band survivor ? (lte, evdo & gps) the laird technologies multi-band survivor ? is a rugged, high-performance multi-band vehicular antenna that covers the lte, evdo and gps frequencies. it is designed to withstand demanding environments and maintain superior rf performance. the antenna can be shipped and installed on a vehicle with the lte whip detached, and the whip can be installed at a later time (if needed ). global solutions: local support tm americas: +1.847 839.6907 ias-americaseastsales@lairdtech.com europe: +1.32.80.7866.12 ias-eusales@lairdtech.com asia: +1.65.6.243.8022 ias-asiasales@lairdtech.com www.lairdtech.com multi-band survivor ? AKIT-GPSS746MP-001 AKIT-GPSS746MP-001 evdo 800/1900 frequency range 821 to 896 mhz, 1850 to 1990 mhz effciency 821-896 mhz 60% 1850-1990 mhz 70% gain 3 dbi vswr < 2:1 nomimal impedance 50 ohm polarization vertical typical power handling 10 w pattern omnidirectional AKIT-GPSS746MP-001 lte (bc12/bc14) frequency range 746 to 798 mhz effciency 70% average gain 0.5 dbi vswr < 2.0:1 nomimal impedance 50 ohm polarization vertical typical power handling 10 w pattern omnidirectional evdo electrical specifications lte electrical specifications AKIT-GPSS746MP-001 gps frequency 1575.42 mhz zenith 80 effciency 11 db gain 20 db vswr < 2:1 nomimal impedance 50 ohm polarization rhcp supply voltage 3.3 vdc noise figure 2 db out of band rejection 740 to 870 mhz 65 db 1850 to 1910 mhz 2400 to 2500 mhz two tone iip2 with -20 dbm cw signals at 2405 and 829.58 mhz (dbm) @ 1575.42 mhz -85 dbm 2nd harmonic product caused by input of +10 dbm cw signal @ 787.71 mhz (dbm) @ 1575.42 mhz -80 dbm gps electrical specifications
innovative technology for a connected world ant-ds-multi-band-survivor 0212 any information furnished by laird technologies, inc. and its agents is believed to be accurate and reliable. all specifications are subject to change without notice. responsibility for the use and application of laird technologies materials rests with the end user, since laird technologies and its agents cannot be aware of all potential uses. laird technologies makes no warranties as to the fitness, merchantability or suitability of any laird technologies materials or products for any specific or general uses. laird technologies shall not be liable for incidental or consequential damages of any kind. all laird technologies products are sold pursuant to the laird technologies terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. ? copyright 2012 laird technologies, inc. all rights reserved. laird, laird technologies, the laird technologies logo, and other marks are trade marks or registered trade marks of laird technologies, inc. or an affiliate company thereof. other product or service names may be the property of third parties. nothing herein provides a license under any laird technologies or any third party intellectual property rights. AKIT-GPSS746MP-001 antenna height 41.8 cm (16.5) weight (mass) 0.68 kg (1.5 lbs) base dimensions (l x w x h) 15 cm x 9 cm x 8.5 cm (5.9 x 3.6 x 3.4) rated wind velocity 281 kph (175 mph ) operating temperature -40c / +70c (-40f / 158f) ip rating ip66 material asa / pc housing color black cable specifications lte (bc13/bc14) evdo800/1900 gps1575.42 cable type rg-316 rg-316 rg-174 cable diameter 2.43 mm (0.096") 2.43 (0.096") 2.62 (0.104") cable length (cm) 17 cm (6.7") 20 cm (7.9") 366 cm (144") connector type sma-male sma-female sma-male jumper (part number) lte jumper (casmam366agsma-001) evdo jumper (catncm366ahsma-001) cable type 200 240 cable diameter 5.08 mm (0.200") 6.1 mm (0.240") cable length 366 cm (12 ft) 366 cm (12 ft) connector type 1 sma - male tnc - male connector type 2 sma - female sma - male mechanical specifications cable specifications azimuth @ 746-798 mhz azimuth @ 824-896 mhz azimuth @ 1850-1990 mhz jumper specifications multi-band survivor ? AKIT-GPSS746MP-001
|
